Juniper-systems Allegro 2 User Guide Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 119
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
58 Allegro 2 Rugged Handheld Owner’s Manual
GPS/GNSS
Allegro 2 Geo models have GPS/GNSS with 2 to 5 meter
accuracy.
Using GPS/GNSS
To use GPS/GNSS, tap on the GPS/GNSS status gadget to
turn it on. The GPS/GNSS starts looking for satellites to use for
a x. The green LED on the keyboard blinks periodically, and
a satellite icon is placed on the title top bar.
Once enough satellites are found, information similar to the
following is shown:
5 SV The number of satellites used for the current
position.
3Diff The type of x you have. Three satellites are
required for a 2D x while four are required for a
3D x. 3Diff means an SBAS (WAAS/EGNOS/MSAS)
signal is being used for the GPS/GNSS solution.
PDOP A measure of accuracy. The lower the number,
the more accurate the x is.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 118 119

Comentarios a estos manuales

Sin comentarios