Juniper-systems Allegro Top Mounting Bracket Manual de usuario descargar pdf (Pagina 2)

Document P/N: 12856-03

Release date: July 2011

Web page: www.junipersys.com

Figure 3: Align mounting surface as close as possible to display.

Rotate bracket into position.

4. Rotate the stylus on the mount into place on the Allegro. This will

allow the edge of the small metal bracket to catch the plastic

edge of the stylus receptacle.

5. Hold the stylus rmly in place as you use a thin, narrow, metal

object to work the rubber tabs around the stylus. Do not cut the

rubber tabs.

6. Position the tabs of the larger bracket so that they will go into the

screw holes on the underside of the Allegro.

Figure 4: Position tabs into screw holes (right side shown)

7. Tighten the thumbscrews until the mounting bracket is secure.

Your bracket is now ready for use.

1132 West 1700 North

Logan, Utah, 84321-1723

Phone: 435-753-1881

Fax: 435-753-1896

1 2 3 4

Sin comentarios

Juniper-systems Allegro Top Mounting Bracket Manual de usuario Pagina 2