Juniper-systems TK6000 User Guide Manual de usuario descargar pdf (Pagina 43)

example, assume you have set up a virtual COM port between

the Field PC and the GPS receiver and that you assigned the

outgoing COM port as COM 6. To assign the COM port in your

navigation program, you would then follow these steps:

1. Locate the place in the navigation program where the COM

port is chosen.

2. Select COM Port 6 as the COM port for the Bluetooth GPS

receiver.

Set Up an Incoming Bluetooth COM Port

Use this option if you want to assign the virtual COM port as

an Incoming COM port (i.e., you want another device to initiate

communications with the Field PC). If you are connected with

a Bluetooth device that supports serial communications, follow

these steps to set up the incoming Bluetooth COM port:

1. Press the COM Ports

tab.

2. Tap on New Incoming Port.

3. Select a numbered COM port from the list.

Note: If the port cannot be created, it is in use. Select a dierent

numbered port.

4. Important: Deselect (clear) the Secure Connection checkbox.

Deselecting this option ensures that the device disconnects

its Bluetooth connection only when you tell it to.

Ch 5 Bluetooth® Wireless Communications 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 69 70

Sin comentarios

Juniper-systems TK6000 User Guide Manual de usuario Pagina 43