Juniper-systems Allegro DOS Manual Manual de usuario descargar pdf (Pagina 70)

70 Allegro DOS Owner’s Manual

F1 Drives

Press F1 and a list of available drives is shown. Highlight the drive

you want to select and press ENTER. The letter of the selected drive

is displayed on the ﬁ rst status line on the FileScout main screen.

F2 Edit

The edit function is used to edit existing text ﬁ les. Highlight the ﬁ le

you want to edit and press F2. The ﬁ le is opened in the Text Editor.

To create a new text ﬁ le, see the description for F10 Utilities, option 2,

Editor.

F3 Copy

This command copies a ﬁ le or a group of ﬁ les. Highlight a ﬁ le or

mark a group of ﬁ les to be copied using Ins and press F3.

You are asked to enter the destination for the ﬁ les to be copied to

on the second status line. Enter the destination path (drive and

directory). If you wish to rename a ﬁ le, include the name within the

destination path. Press ENTER to copy the ﬁ les.

F4 MkDir

This command is used to create a new subdirectory in the current

directory path. When F4 is pressed, you are asked to enter the name

of the new subdirectory on the second status line. Enter the name

and press ENTER.

F5 Xfer

Use this function to set up communication parameters and establish

communication between the Allegro and another computer. When

you press F5 the following communication functions are shown:

Function Description

F1 = COM Port Set Up Communication Port

F2 = Baud Select Baud Rate

F3 = Cmd Access the Commands

F4 = Recv Receive Files From PC

F5 = Send Send Files to PC

F6 = Lynx Toggle Lynx On and Off

Refer to Establishing Communication Between Computers and

Communicating with Other PC Programs earlier in this chapter for

details about these functions.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 165 166

Sin comentarios

Juniper-systems Allegro DOS Manual Manual de usuario Pagina 70